Fencing

Concrete fence posts, pillars & retaining elements that hold.

Concrete is what makes a fence actually last. Speakmans Concrete LLC installs concrete fence posts, masonry pillars, and concrete retaining elements that resist Utah wind, frost heave, and the lateral soil pressure that snaps ordinary posts at the ground line. Our E100 General Engineering credential covers the structural and retaining work a real fence system requires.

Why It Pays Off

The concrete reasons this fencing investment earns its keep - flip through the stack to see each one.

Outlast the Fence Above

Frost-depth, belled footings prevent the heave that tilts ordinary posts after the first Utah winter.

Gates That Swing True for Decades

Reinforced piers sized to gate load and wind exposure carry the weight without cracking or leaning.

Retaining Walls That Don't Overturn

Geogrid reinforcement and drainage prevent the hydrostatic pressure that topples retaining fence walls.

No Ground-Line Failures

Correct-slump, consolidated concrete eliminates the honeycombing that lets water into columns and snaps them at the ground line.

Why Choose Speakmans for Fencing

The local accountability, fencing-specific engineering, and warranty behind every pour we place - in one quick overview.

Company Overview & Local Credentials

Fencing Built by a Local, Accountable Crew

Speakmans Concrete LLC brings 20+ years of hands-on Utah field experience and E100 General Engineering & B100 General Building licensing to every fencing project. Headquartered in Tooele Valley since 2006, we answer directly to our neighbors - when you call, you reach the crew that built your work, not a call center.

Environment & Specialized Protection

Engineered for Utah Soil & Freeze-Thaw

Utah's expansive clay swells when wet and shrinks when dry, heaving slabs and pulling foundations apart - while freeze-thaw attacks exposed edges and surfaces. Our fencing is engineered for these exact conditions: 95% Proctor sub-base compaction, air-entrained mix design, drainage shaping away from structures, and reinforcement sized to the soil report.

Service Process, Warranty & CTA

Clear Process, Real Warranty

Every fencing project follows a disciplined sequence: on-site evaluation, itemized bid, excavation & sub-base prep, formwork/rebar/pour, and final quality inspection - then a 1-Year Workmanship Warranty. Get a free, itemized on-site estimate and put our two decades of trade mastery to work.

Key Benefits

What you actually get from an engineered fencing pour - durability, compliance, and local accountability.

Frost-Heave Resistance

Belled, frost-depth footings prevent the heave that tilts posts after the first winter.

Wind-Load Capacity

Reinforced piers sized to wind exposure carry gate loads without cracking or leaning.

Hydrostatic Pressure Relief

Drainage behind retaining fences prevents the built-up pressure that overturns walls.

Finish to Match Property

Smooth, broom, stamped, or colored concrete finishes match the property's character.

Our Fence Foundation Process

From utility locates and layout through frost-depth drilling, reinforcement, pour, and cure, every fence foundation follows a sequence engineered to resist Utah frost heave and wind loads.

1

Locate & Layout

Utility locates, property-line layout, and pier spacing.

2

Dig to Frost Depth

Holes to 36–42" with belled bases resisting frost jacking.

3

Pour & Reinforce

Correct-slump concrete, rebar, and embedded anchors.

4

Cure & Load

Proper cure before the fence or gate is loaded.

Fencing Frequently Asked Questions

Answers on post depth, concrete gate pillars, and retaining fence walls from a locally accountable, E100 General Engineering licensed Tooele fence crew.

Need Professional Fencing Work in Utah? Call (435) 830-0374 or Send Your Request Today.